Just Added

Mertz portable silo (2011) (6 units): 2,500 cubic foot, self contained, solar powered, good clean unit with very good 11r 22.5 tires, weigh scale, units set up quick and easy, electric over hydraulic system to raise and lower them, take up about 12 square

Besser spade loader/unloader: complete with rack conveyor and block push off

Fejmert Model S 1125 (2009): totally rebuilt with factory parts, (1) discharge door, comes with cement scale, load cells and butterfly valve. Custom inlets, aggregate hopper etc. can be provided by the seller as extras, 220V 3Ph, 60Hz

Fejmert S-500 pan mixer: 1 discharge door

Grout Precast Hog (2016): 5 hp motor, less than 25 hours on it, used for R&D

Cap mold: produces 4 caps with a 28" square base, includes rings for 2 different edge profiles, 2 large metal pallets for striping and heavy-duty trunnions for rolling the mold. Mold faces are fiberglass reinforced with steel frames

Urethane mold: 185"L x 84"W x 2.5" thick, produce panels for highway sound wall, fractured fin profile, only used about 5 times

Double tee form: self stressing, 125' long by 12' 6" wide with 60" stem spacing and 30" deep stems

Double tee form: self stressing, 320' long by 14' wide with 72" stem spacing and 30" deep stems

Double tee form: self stressing, 135' long by 13' wide with 72" stem spacing and 37.5" deep stems

Double tee form: self stressing, 325' long by 14' wide with 72" stem spacing and 30" deep stems

Mack RB (1990): 7 Ton DelZotto septic tank bed / with rear swing outs for loading wide product / 350 Mack engine / T2090 Mack trans/ 133,000 miles.