Used Reinforcement Equipment
AWM single lattice girder welding machine (2008): chiller, dust collection system, coil holders, straightening unit, control panel, no air compressor
Year: 2008Condition: E
Price: $99,000
Fiber dosing system: Demag hoist
Condition: GPrice: $8,000
Hawkeye QRE cage machine (1983): 5 mandrels (2', 2 1/2', 3', 3 1/2', 4')
Year: 1983Condition: G
Price: $7,000
Hawkeye QRE cage machine: wire spoon turntable; mandrels available at additional cost (6' for 60" dia, 5' for 48" dia, 5' for 72" dia, 48" - 24" eccentric cone for 4' long)
Condition: EPrice: $6,700
KRB #11M bender (2017): standard pins included, 2 stage foot pedal, turntable speed is infinitely variable from 2-17 rpm
Year: 2017Condition: E
Price: $12,000
MBK 33-190/24 x 3000 cage machine: RMG Straight & Cut, some brand new spare parts
Condition:Price: $120,000
Mesh roller: 8', W6, cleated drive roll, powered bending roll adjustment, roll tray
Condition: FPrice: $14,500
Pedax Model MAFIX S 6500 guillotine shear line (2008): for wire mesh and rebar mats, will cut mats 21' wide up to 1/2", includes 3 intake and output tables, 1 table is 10' by 8', the other 2 are 6' by 20'.
Year: 2008Condition: VG
Price: $65,000
Pedax Spinmaster Backfeed (2016): 72' long for automatic production of non-welded roll mat reinforcing. Complete with control system. 15 automatic spinning stations, reinforced for up to #11, spare parts; can produce up to 3 mats of 23' each
Year: 2016Condition: E
Price: $340,000
Pedax Spinmaster Backfeed (2017): 66' long for automatic production of non-welded roll mat reinforcing. Complete with control system. 14 automatic spinning stations, reinforced for up to #11, spare parts
Year: 2017Condition: E
Price: $360,000
Sima CX-20 electric/hydraulic rebar cutter: " #6 capacity, 90 day warranty; 110v
Condition:Price: $725
Sima CX-20 electric/hydraulic rebar cutter: 3/4" #6 capacity, used very little; 90 day warranty; 110v
Condition: EPrice: $895
Sima DEL 32 electric rebar bender: 230v, nearly new, only few test bars have been bent; see photo for specs; greatly reduced!
Condition: EPrice: $5,857
Simpedil shear: hydraulic, capacity @ 1 x 1 1/4" (#10) or 2 x 7/8" (#7), operated by electric foot pedal, 30 strokes/minute, 5.5hp, guard with electrical safety lock; Brand New!
Condition: EPrice: $7,450
Steinweg Model B40 rebar table bender (1997): rebar bender bends up to #11, 220V 3 phase power, Completely rebuilt and not in production since rebuild.
Year: 1997Condition: VG
Price: $12,000