Used Prestress Forms

Bonnybrook

Bonnybrook Double Tee bed (2005): 12'W x 340'L x 28" leg depth, side rails and bulkheads

Year: 2005
Condition: G
Price: $208,000

Bonnybrook

Bonnybrook H-beam forms: 100' of bed, 100' of 22" side forms, self stressing at 248 kips, and 100' of 20" side forms non-stressing. Have drawings, call for details

Condition: G
Price: $16,000

Bonnybrook

Bonnybrook self-stressing girder form (2010): 3 section, 110 long; the form components are all straight and have been oiled periodically during storage

Year: 2010
Condition: E
Price: $55,000

Double Tee form: 10'W x 550' long, 5' center to center stem spacing, comes with hinged 2" tall side rail, 660 KIPS @ 16", stem depth is 30" x 2" fixed flange

Condition: G
Price: $110,000

Double tee form: 120' long by 6' wide, stems are 18" spaced at 36" centers

Condition: F
Price: $15,000

Flat table form: 4' wide x 210' long, self stressing, has 8" fixed side walls that fold back on cam

Condition: FG
Price: $70,000

Hamilton Form

Hamilton box beam form: 220', 33" x 4', refurbished a few years ago

Condition: E
Price: $19,000

Hamilton Form

Hamilton Double T form: 440 bf (11 - 40' sections) of self-stressing 12' x 26" deep,5-1/2" to 8" stem width, Fixed 4" rail, radius type, in place, staggered strand pattern @ 900K, steam lines in place, clean off surface rust and pour.

Condition: G
Price: $175,000

Hamilton Form

Hamilton Form Aashto Type III form: 150 bf, side rails

Condition: G
Price: $12,000

Hamilton Form

Hamilton Form box beam form: 33" x 36", 80 linear feet

Condition: G
Price: Make offer

Hamilton Form

Hamilton Form Double Tee form (2009): 325' long, (6) bulk heads, self stressing, 26" fixed stem depth, 1320 kip capacity, side by sidestress pattern, see drawings for more details; only 20 pours! Stored indoors!

Year: 2009
Condition: VG
Price: $250,000

Hamilton Form

Hamilton Form Double Tee form (2010): 8DT24 w/1' - 10" stems, 4' apart, self-stressing, 1000K

Year: 2010
Condition: E
Price: $95,000

Hamilton Form

Hamilton Form Double Tee form (2013): 12' wide, 250' long; this form was used for the Target Supercenter

Year: 2013
Condition: E
Price: $125,000

Hamilton Form

Hamilton Form inverted tee form: self-stressing, 125'L x 34"W, 12" ledges, 24" stem extends 6" to go to 30" total height 42", 1/2" pre-stressed cable compatibility, (80) cable entries on bulkhead, Vickers power system

Condition: G
Price: $60,000

Hamilton Form

Hamilton I beam form: 220', Type 2

Condition: VG
Price: $43,000

Hamilton Form

Hamilton Type V forms: 40' long x 10 sections = 400 LF total

Condition: G
Price: $10,000/ea

Helser

Helser box girder form (2015): self-stressing, casting surface 90m long. Width 1.2m. Depth can vary from 600mm up to 1300mm. Double stress head system for straight and deflect strand

Year: 2015
Condition: E
Price: $380,000

Helser

Helser Industries bleacher forms (2014): self-stressing, stressing bulkheads are included, maximum casting length is 42'

Year: 2014
Condition: E
Price: $500,000

Helser

Helser stadium bleacher form (2009): radius, can also make a straight bleacher

Year: 2009
Condition: G
Price: $30,000

Ledger beam form (2000): self-stressing, sloped sidewall; 100'L

Year: 2000
Condition: G
Price: $30,000

Pile form: 24" x 120 feet, self stressing, the bottom supports are in pretty bad shape but the form steel that handles the stress is in good shape. The form also has an 18" form liner included

Condition: FG
Price: Make offer

Plant City Quad Tee form: Self stressing, 400' long, 12" deep stems, 10' wide; also 80' hat were plated to use as flat beds; available - Hamilton screed and curing tarp; added plate to the beds and stressed on them; 10 beds @ 40' each

Condition: G
Price: $40,000

Roth

Roth hollow core slip-former (1985): will produce 6", 8", 10", and 12" deep 4 ft. wide sections. Comes with two bottom cassettes strand guides, tongue & groove side molds for wall panels, and various other spare parts.

Year: 1985
Condition: VG
Price: $45,000

Spillman flat tables: 76' x 10', 126' x 8', 126' x 6'6", 240' x 9'

Condition: G
Price: 7/sq

Spillman tilt table: 10'W x 40'L, hydraulically operated, control panel

Condition: G
Price: $15,000